• Up to 5” of adjustability from highest to lowest setting
• Ideal to use when pulling multiple trailers with varying trailer heights
• Simply remove the clevis pins to raise/lower the bracket to desired height, then reinsert the clevis pins and secure with cotter pins to begin towing
• Includes all necessary mounting hardware
• Looking for a ball? Click Here

Recommended for tongue weights above 1,500 lbs

• 3/4” thick steel ball mounting plate for heavier trailers
• By design, can be flipped up or down to provide additional adjustability
• 1 ¼” hole size for 1 7/8”, 2”, 2 5/16” ball
• Used for connections less than 2 1/4” below the receiver pin hole, to 5 1/2” above the receiver pin hole
• Mounting hardware included

Need more height adjustment? Check out the extended ball mount.

NOTE: when using a weight distribution bracket, tongue weight and gross trailer weight ratings for the hitch are derated 25%

Mounting hardware for the bracket to the AirSafe hitch is provided. Hardware for connecting the weight distribution bracket to your current setup is NOT provided.

For heavier loads (15,000+ lb.), we recommend using a solid weight distribution bracket to reduce the chance of cavitation over the years.

• For a 2″ receiver, this bracket has a minimum drop of 3.5″ and a maximum drop of 7.5″
• For a 2.5″ receiver, this bracket has a minimum drop of 3″ and a maximum drop of 7″
• For a 3″ receiver, this bracket has a minimum drop of 2.5 and a maximum drop of 6.5″

Should not be used for tongue weights exceeding 1,500 lbs. Tongue weights exceeding 1,500 lbs. should use the 3/4″ Extended Ball Mount.